Safety information
5
Applications Card CPU2
syd-0421/1.2 – R2.1 – 07.2012
Aastra 400 products contain plastics based on a pure ABS, sheet steel with
an aluminium-zinc or zinc finish, and epoxy resin-based PCBs. These
materials are to be disposed of in accordance with the guidelines
stipulated under current legislation.
Aastra 400 products are disassembled exclusively using detachable screwed
connections.
Safety information
Reference to hazards
Hazard warnings are affixed whenever there is a risk that improper handling may
put people at risk or cause damage to the Aastra 400 product. Please take note of
these warnings and follow them at all times. Please also take note in particular of
hazard warnings contained in the user information.
Installation and operating instructions
Before you begin with the installation of the Aastra 400 communication server:
• Check that the delivery is complete and undamaged. Notify your supplier
immediately of any defects; do not install or put into operation any components
that may be defective.
• Check that you have all the relevant user documents at your disposal.
• During the installation follow the installation instructions for your Aastra 400
product and observe to the letter the safety warnings they contain.
Any servicing, expansion or repair work is to be carried out only by technical
personnel with the appropriate qualifications.
Note:
The integrated Windows operating system on the application card is
perfectly configured for the integrated applications. Do not for any
reason whatsoever modify the Windows settings; never install any other
software or uninstall already installed software or else you will lose any
right to warranty.
The application card has its own On/Off pushbutton, although it is connected to
the same power supply unit as the communication server.
You can switch on or shut down the communication server and application card
individually or simultaneously via the integrated user interface.