Page 10
Aarrow Ecoburn Inset 5
INSTALLATION
Insulating
infill
Expansion
Joint, Thin
Straw Board
Or
Corrugated
Cardboard
etc.
Constructional Hearth
Fire Back
To
BS 1251:1987
The stove should fit into a standard 16” or 18” open fire place without the removal of the
fire-back (chair brick), provided the same complies to BS 1251:1987.
Some minor adjustment may be required to ensure a good fit. The decorative fire surround
should be manufactured from non-combustible materials only.
Fig 1
Ecoburn Inset Stove Cross Sectional
View, Installed Into A Standard 16” or
18” Chair Brick.
Throat Forming Lintel
Fire cement seal
(See page 12)
Decorative Fire Surround
(Non Combustible)
Superimposed Hearth