☛
8
PRODUCT OVERVIEW -
PC INSTALLATION INSTRUCTIONS
☛
☛
NOTE:
The USB3 does not work with condenser microphones or any other
microphones that require phantom power. If you are not sure whether your
microphone requires power or not, please check the microphone’s
documentation It is possible to use a separate preamp to power the mic, and
then connect it to the USB3 via the line inputs on the back.
PC INSTALLATION INSTRUCTIONS.
The USB3 operates on Windows 98 SE, Windows ME, and Windows 2000. The
USB3 is not compatible with Windows 95 additionally, Windows 98 First Edition
has exhibited installation problems. For information on upgrading from Windows
95 or 98first edition please go to
www.microsoft.com
.
Please make sure you have a compatible USB host controller (see page 3)
NOTE
: The USB3 drivers are not written by Aardvark. Rather, they use
Microsoft’s standard USB audio driver. If you run into problems related to this
driver, please contact Microsoft.
1.
Power up your PC, and put your Windows 98 SE, ME or 2000 CD in your
CD-ROM drive. Some computers sold with Windows preinstalled may not
have included the Windows 98/SE/ME CD. If this is the case, the necessary
files are probably already on your hard drive and no CD is required for
installation.
2. Connect the USB3 to the USB port on your PC. If your PC has multiple USB
ports, it should not matter which port you use. Check to see if the USB light
on the USB3 is on. If it is, Windows should automatically detect new
hardware.
NOTE
: If windows does not detect the new device, and the USB light is lit, you
may have to force windows to find the hardware. Go to START | SETTINGS |
CONTROL PANEL select ADD NEW HARDWARE, select NEXT, and Windows
should find the USB3.
3. The Add New Hardware Wizard will appear, stating that it has found a USB
COMPOSITE DEVICE, click Next > to proceed.