Aarcomm Systems Inc.
18 Fawcett Rd., Coquitlam, B.C., V3K 6X9, Canada
Page 5
Telephone: +1 (604) 265-8500
Email:
Rev. 3
900 MHz
Antenna Installation Guide
Pull the antenna whip so that the bushing seats into the rubber insulator of the base-cap:
Thread the base-cap onto the antenna base, using a rubber washer only if the mounting surface is
less than 1.25 mm thick, then
tighten another one-eighth to one-quarter of a turn
.
Note: If the
antenna whip feels loose to the touch, remove the rubber washer and/or adjust the bushing so that
the bottom end of the antenna whip protrudes further from the bushing.
