3.2 Precautions for installation
3.2.2 Joints of oil hose must be firmly connected in order to avoid leakage.
3.2.3 All bolts should be
tightened before use
.
3.2.4 Do not place any vehicle on the hoist
during the installation
procedure.
3.3 Installation
Step 1:
Remove the packaging and take the mechanical and hydraulic assembly to the designated installing place.
Please do read and understand this manual thoroughly before next step.
Step 2
：
Connect the oil hose to the pump assembly with a proper wrench.
( Make sure the hose end is clean).
Step3: Connect the wires of limit switch to the wiring terminals in the control box. Make sure to connect NO.1 wire
with NO.1 terminal, NO.2 wire with NO.2 terminal and so forth.
Step4: Link the air hose to compressed air source. (This step is only for the type with pneumatic safety lock)
Step 5: Fix the base frame. (Optional )
This AL-8803 is portable. In other words users may use it without having it placed and fixed on the ground. Nevertheless,
we
recommend the hoist be fixed on a smooth, level concrete surface. Please see concrete requirements in this manual.
Step 6: Trial testing with load. (Do not use cars for trial testing)
7
