10
00kg
Single Post Parking
Hoist
OPERATING INSTRUCTIONS
The hoist should only be operated by personnel that have been
thoroughly trained in operation and maintenance of the hoist.
1.
Position the vehicle evenly
on the platform
, turn off
the
engine and apply the park brake.
2.
Note: It is important that the vehicle is evenly balanced on
the hoist.
3.
Make sure that all personnel are clear and there are no
obstructions around the hoist.
TO RAISE THE HOIST
1.
Turn the power on.
2.
Press the “UP” button on the control box.
3.
Raise the hoist to approximately 500mm, stop and check
that the
vehicle is evenly balanced on the hoist.
4.
Continue raising the hoist to the desired working height
checking for any obstructions.
5.
Once the hoist has reached the desired working height
lower the hoist onto the safety locks by means of pushing
the lowering leaver on the hydraulic power unit.
Note: Check for correct engagement on the locks.
TO LOWER THE HOIST
1.
Raise the hoist 100mm or until the locks are clear.
2.
Pull the lock
release
cable on
the
post
carriage
.
3.
Lower the hoist by pushing on the lowering lever.
Note: Check for any obstructions under the hoist when
lowering.
4.
When the vehicle is lowered to the lowest position
you can
remove the vehicle from the hoist.
Turn off the power.
Design Code: AS1418.9 -1996
MODEL:
AutoLift
167261
SERIAL NO.:
APPROVALS:
WAH22329
