![background image](http://html.mh-extra.com/html/aandd/winct-plus/winct-plus_instruction-manual_446567033.webp)
32
Step 8 The current settings for serial communication will be displayed. Confirm that the settings
correspond with those shown in the table below . If your settings are different, change the
settings as specified in the table and then perform steps 9 and 10.
If the settings are correct, proceed to Step 11.
Baud Rate
2400
Data Bits
7
Parity
Even
Stop Bit
1
Step 9 Scroll down to the bottom of the screen and click the OK button.