15
-Sending a send data command to the weighing instrument for data acquisition.
Click the “Test” button to send the command set in the <Property> window.
If a response to the command is displayed, communication is normally made.
-Sending data from the weighing instrument by pressing the [PRINT] key on the weighing
instrument.
(When used in Key mode, Auto print mode and Stream mode.)
Press the [PRINT] key on the weighing instrument to send data.
If data is displayed, communication is normally made.
Step 2 Starting communication
Click the “Start” button to communicate.
Step 3 Data acquisition
When pressing the [PRINT] key on the weighing instrument, the data of the
instrument will be sent to the computer and displayed in each cell.
To send a command to the weighing instrument, click the “Command” button.
The set command will be sent to the weighing instrument.
(If “Repeat” is selected in the “Manual/Repeat” option, the command will be
automatically sent in every setup time.)
*Note: As a standard, the total data should not exceed 10,000.
