![background image](http://html1.mh-extra.com/html/aandd/ub-401/ub-401_instruction-manual_3130220006.webp)
ENGLISH 5
Using the Monitor
2. Fastening the cuff
1. Wrap the cuff around your wrist about 1
cm above your hand as shown in the
figure at the right.
2. Fasten the cuff tightly using the Velcro
strip
Note)
For proper measurements, fasten the cuff tightly and measure on a bare wrist.
3. How to take proper measurements
For best accuracy in blood pressure measurement:
• Sit comfortably at a table. Rest your arm on the table.
• Relax for about 5 to 10 minutes before measurement.
• Raise your hand so that the cuff is at the same level
as your heart.
• Remain still and keep quiet during measurement.
• Do not measure right after physical exercise or a bath.
Rest twenty or thirty minutes before taking
measurement.
• Measure your blood pressure at about the same time
every day.
4. Measurement
During measurement, it is normal for the cuff to feel very tight. (Do not be
alarmed.)
5. After measurement
After measurement, press the START button to turn off the power.
Remove the cuff and record your data.
Note)
The device is provided with an automatic power shut-off function which turns off
the power automatically one minute after measurement.
Allow at least ten minutes between measurements on the same person.
Содержание UB-401
