![background image](http://html2.mh-extra.com/html/aandd/ua-767pc/ua-767pc_instruction-manual_3111860009.webp)
9
Measurements
Remain still while the device is in operation.
When a measurement is made with insufficient pressure, the device will
pump again to a higher pressure.
4. When measurement has been completed, the buzzer sounds and the air is
automatically released from the cuff. The systolic pressure, diastolic pressure
readings, and the pulse rate are displayed.
5. Turning the Power OFF
Press the START button to turn the power off. The device will be in standby
mode.
6. Subsequent Measurements
If a subsequent measurement is required, turn off the power and turn it on
again. When the "0" is displayed, the device is ready for measurement again.
Note: Please wait for about 10 minutes before repeating the
measurement.
7. Automatic Power OFF Function
If this device is left on after a measurement, it will turn itself off after about 1
minute. It may be turned off at any time by pressing the START button.
Systolic Display
Pressure Switch
Diastolic Display
Start Button
Pulse Display