A&D TM-2564G, Инструкция по эксплуатации

Страница: 40 / 62

29
5. Press the or key to change the value.
6. The changed value is confirmed when:
Moved to the next menu or sub menu.
The HOME key is pressed to return to the home
display.
Note
•
In the setting mode display, after about 5 minutes of inoperation, the home display will be indicated.
•
When setting the clock, note the following.
The time in the clock menu indicates that of when the clock menu is displayed, and it remains the same
as long as the clock menu is displayed. The actual clock of the instrument continues normal operation.
Changing any item of the clock menu is reflected and resets the clock.
•
When an alarm occurs, the display will return to the home display.
Setting items
Menu Sub menu Setting range Unit Description
Upper OFF, 50-250 (by 10), 200
SYS
Lower OFF, 30-200 (by 10), 70
Upper OFF, 30-200 (by 10), 150
DIA
Lower OFF, 10-200 (by 10), 40
mmHg
Upper OFF, 50-220 (by 10), 170
HR/PR
Lower OFF, 30-150 (by 10), 40
bpm
Upper OFF, 75-99 (by 1)
SpO
2
Lower OFF, 50-99 (by 1), 85
%
Upper OFF, 30-44 (by 0.5)
Limits
Temp
Lower OFF, 26-40 (by 0.5)
°C
Sets the limit values for alarm.
Note
When the lower limit value for
SpO
2
measurement has been
set to be less than 85%, it will
be reset to the default setting
upon power-on.
Cycle
OFF, CON, 2.5, 3, 5, 10,
15, 20, 30, 60, 90, 120
min
Sets the cycles for interval
measurement.
Pressurization AUTO, 100-260 (by 20) mmHg
Sets the pressurization value for
blood pressure measurement.
"AUTO": Detects the pulse at
the start of pressurization to
pressurize properly.
During interval measurements,
"AUTO" is used.
Patient Adult, Neonate
⎯
"Adult": Other than neonates
NIBP
Notice buzzer OFF, ON
⎯
"ON": Sounds a buzzer 15
seconds before starting an
interval measurement.
Underlined items: Default settings