A&D TM-2440, Инструкция по эксплуатации

Страница: 69 / 96

51
8.6.
Blood Pressure Measurement Operations
8.6.1.
A-BPM Operations
When A
-
BPM is started, blood pressure is measured in
accordance with the preset parameters.
Note
Set the built-in clock and initial pressurization value before
measurement because A
-
BPM uses them. Refer to "
8.2.2. The
Clock and the Monitor Function of Measurement
" and "
8.3.
A-BPM Preset Programs
".
When the recorder is removed, suspend A-BPM by pressing and
holding the EVENT switch for 3 seconds or more.
If the recorder is removed during A
-
BPM, the inflation of the cuff
is started next
start time
, the cuff may break.
To resume A
-
BPM, press and hold the EVENT switch for 3
seconds or more again.
The mark is displayed while A
-
BPM is activated.
Manual blood pressure measurement can be performed during
A
-
BPM waiting mode.
The measurement result of the manual blood pressure
measurement can be stored in the memory.
When A
-
BPM is stopped, the error code E07 is displayed on
the OLED display and stored in the memory.
To start A-BPM
Step 1. Press and hold the EVENT switch for 3 seconds or more.
Step 2. The mark is shown on the OLED display. A
-
BPM is
started.