A&D HW-10KCEP, Инструкция по эксплуатации

Страница: 21 / 48

HV/HW-CEP Series Page 19
8. Basic Operation
8.1. Turning the Scale on/off and Weighing
8.1.1. When Using Batteries
Step 1 Install four new batteries. Refer to "5.2. Installing the Batteries".
Step 2 Confirm that nothing is placed on the pan.
Step 3 The scale turns on/off using the
ON/OFF
key alternately.
Step 4 Check the accuracy of weighing. Allow 30-minute warm up before calibration.
Step 5 With nothing on the pan, press the
ZERO
key to display zero.
Step 6 Place an article to be weighed on the pan gently.
Step 7 Wait for the stability mark to be displayed. Read the weight value.
Step 8 Remove the article from the pan.
Step 9 Turn the scale off using the
ON/OFF
key.
Caution
When is displayed, this means the batteries will run out soon.
Replace used batteries with four new ones when “
lb
” is displayed.
Battery life depends on the ambient temperature.
Remove the batteries from the display unit when the scale is not to be used
for a long time. The batteries may leak and cause damage.