A&D HW-10KCEP, Инструкция по эксплуатации

Страница: 13 / 48

HV/HW-CEP Series Page 11
The battery life depends on the ambient temperature.
Remove the batteries from the display unit, when the scale is not to be used
for a long time. They may leak and cause damage.
Damage which is due to battery leakage is not covered under warranty.
5.3. Grounding the scale
When using where there may be static electricity, ground the scale.
The grounding procedure depends on the scale model. Refer to the table below.
These procedures are only for grounding part of the scale.
Models Refer to
HV-15KCEP/HW-10KCEP Procedure A
HV-60KCEP/HV-200KCEP
HW-60KCEP/HW-100KCEP/HW-200KCEP
Procedure B
Procedure A
(HV-15KCEP/HW-10KCEP)
Secure the grounding cable using a M4 screw in the
screw hole between the two hexagon bolts on the
base unit bottom side. (Part of “ ”)
Procedure B
HV-60KCEP/HV-200KCEP
HW-60KCEP/HW-100KCEP/HW-200KCEP
Secure the grounding cable using the screw that
secures the under cover. (Part of “ ”)
Base unit
bottom side
Levering feet
Under cover
Base unit
bottom side