A&D GF-10K, Инструкция по эксплуатации

Страница: 71 / 104

69
12-6-2. Recalling the tare value (Quick selection mode)
The procedure below describes an easy way to recall the tare value to be used for weighing.
When the recalled tare value is to be changed, refer to "12-6-1. Storing the tare value".
Step 1 Set the "Data memory (
data
)" parameter to "
5
".
Step 2 Press the
MODE
key to enter the tare value
recalling mode. The tare value last selected
with its tare number appears. The display is
as shown to the right, with all the digits
blinking.
Step 3 Press the
MODE
key to select the value.
Each time the
MODE
key is pressed, the
displayed value changes as follows:
(.....
↔
t03
↔
t04
↔
........
↔
t20
↔
t01
↔
...)
Step 4 Press the
PRINT
key to confirm the selection.
The balance returns to the weighing mode with
the selected tare value ready for use.
To cancel the selection, press the
CAL
key.
The balance returns to the weighing mode.
Note
When no operation is performed in step 4 (after a few seconds of inactivity), the
balance selects the value currently displayed and returns to the weighing mode
automatically.
Canceling the tare value data
Cancel the tare value data as follows:
Step 1 Remove everything from the weighing pan
and press the
RE-ZERO
key to cancel the
tare value.
Tare value
Tare number
Tare value
to be used
Weighing is performed
with the setting in
t04
ready for use.
Quick selection mode
Tare number
Tare value to
be canceled.