A&D GF-10K, Инструкция по эксплуатации

Страница: 41 / 104

39
10-4. Description Of The Item "Data Output Mode"
The parameter setting of "Data output mode (
prt
)" applies to the performance when the
"Data memory (
data
)" parameter is set to "
2
" (to store the weighing data) and when the data
is transmitted using the RS-232C interface.
Key mode
When the
PRINT
key is pressed with the stabilization indictor turned on, the balance
outputs or stores the weighing data and the display blinks one time.
Required setting
dout prt 0
Key mode
Auto print modes A and B
When the displayed value is stable and the conditions of "Auto print polarity", "Auto print
difference" and reference value are met, the balance outputs or stores the weighing data.
When the
PRINT
key is pressed with the stabilization indictor turned on, the balance
outputs or stores the data and the display blinks one time.
Auto print modes A
Example For weighing each time a sample is placed and removed, with "
ar-d
"
set to "
1
" (to adjust zero after the data is output).
Required setting
dout prt 1
Auto print mode A (reference = zero)
dout ap-p
Auto print polarity
dout ap-b
Auto print difference
dout ar-d 1
Zero after output
Auto print modes B
Example For weighing while a sample is added.
Required setting
dout prt 2
Auto print mode B (reference = last stable value)
dout ap-p
Auto print polarity
dout ap-b
Auto print difference
Stream mode
The balance outputs the weighing data continuously regardless of the display condition. The
display does not blink in this mode. The interval memory mode is used when the "Data
memory (
data
)" parameter is set to "
2
" (to store the weighing data).
Example For monitoring data on a computer.
Required setting
dout prt 3
Stream mode
dout data 0
Data memory function is not used
ba5fnc 5pd
Display refresh rate
5if bp5 Baud rate
Caution The balance may not transmit the data completely at the specified refresh rate,
depending on the baud rate or data added to the weighing data such as time,
date and ID number.