manualshive.com logo in svg

A&D FX-1200i, Инструкция по эксплуатации

Поделиться
Скачать
A&D FX-1200i Скачать руководство пользователя страница 61

 

54

14-3  Using Windows Communication Tools (WinCT) 

When Windows is used as an operating system in a personal computer, the WinCT software, that 

is downloaded from the A&D website, can be used to transmit the weight data to the personal 
computer. 

The WinCT has two communication methods: “RsCom” and “RsKey”.   

 

RsCom 

  Can transmit commands to control the balance. 

  Can make bi-directional communication between the balance and a personal computer using 

the RS-232C serial interface. 

 

Can display or store the data using a text file format. Can also print the data using a printer 
connected to the personal computer.

 

  When several ports of a personal computer have balances connected, can communicate with 

each balance simultaneously. 

  Can share a personal computer with other application software. 

 

RsKey 

  Can transmit the weight data output from the balance directly to other application software 

such as Microsoft Excel. 

 

Can be used with most application software. 

 

Using the WinCT software, the balance can do the following: 

1  Analyzing the weight data and the statistics with “RsKey”   
  The weight data can be input directly into an Excel worksheet. Then, Excel can analyze the 

data to obtain sum, average, standard deviation, maximum and minimum value, and display 
them in a graph.   

2  Controlling the balance using commands from a personal computer 
  By using “RsCom”, the personal computer sends commands such as “re-zero” or “send weight 

data” to the balance and controls the balance. 

3  Printing the balance GLP report using your printer 
  The balance GLP report can be printed using a printer connected to the personal computer. 

4  Receiving weight data at a certain interval 
  The weight data can be received at a certain interval and data characteristic with elapsed time 

can be obtained. 

 

5  Using a personal computer as an external indicator 
  With the “RsKey” test mode function, a personal computer can be used as an external weight 

indicator for the balance. (To do this, set the balance data output mode to stream mode.) 

 

 

Содержание FX-1200i
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды