16
The frame ground and the shield are connected internally and there is no difference
between them in use.
Data format
Example of data
Out of range
“kg”
(+)
O L
,
+ 9 9 9 9 9 9 9 9 _ k g C
R
L
F
Out of range
“kg”
(+)
O L
,
+ 9 9 9 9
.
9 9 9 _ k g C
R
L
F
The position of decimal point is different according to the model and/or “
f02
”.
Example for the weighing unit “lb-oz” (added)
Weighing data “lb-oz” (+)
S T
,
+ 0 0 1 L 0 1
.
6 _ o z C
R
L
F
Data output mode (
f06
)
The commands can be used in all data output modes (
f06-1
is command mode only).
The new modes
f06-5
,
f06-6
and
f06-7
are added to the Function “
f06
”.
Auto-print Mode
+
data and OK (
f06-6
)
Data is sent if the weight display is stable at
+
5d (d = weighing display division) and
above, and the comparator result OK in addition. The next transmission cannot
occur until after the weight display falls below
+
5d.
Auto-print Mode
+/-
data and OK (
f06-7
)
Data is sent if the weight display is stable at ±5d (d = weighing display division) and
above/below, and the comparator result OK in addition. The next transmission
cannot occur until after the weight display falls between
–
5d and
+
5d.
Multi-connection with Print key mode (RS-422/485) (
f06-5
)
This is one of the applications when a PC and more than one FS
-
D (RS-422/485
installed) are connected. Refer to “Multi-connection with Print key mode” in detail.
(In “
2-3. Command Mode
”)
Examples of command and reply
(“
_
” shows “Space” (20H).)
There are corrections to the instruction manual 1WMPD4001368.
Set a HI limit value or upper limit weight. (No reply for
f20-1
.)
When
f07-0
or
f07-1
is set, the
command should have “
+
” and 6
digit number without decimal point.
When
f07-0
or
f07-1
is set, the command
should have “
+/-
” (“
+
” only for
f07-1
) and 6
digit number without decimal point.
Set a LO limit value or lower limit weight. (No reply for
f20-1
.)
When
f07-0
or
f07-1
is set, the
command should have “
+
” and 6
digit number without decimal point.
When
f07-0
or
f07-1
is set, the command
should have “
+/-
” (“
+
” only for
f07-1
) and 6
digit number without decimal point.
When
f07-2
is set, the command should have “
+
” and 5 digit number without
decimal point.
Содержание FS-D
Страница 1: ...Weighing Indicator for Check Weighing Scales 1WMPD4002313 ...
Страница 23: ......
