A&D FC-50Ki, Инструкция по эксплуатации

Страница: 58 / 64

56
Remote Scale kg/lb relationship
Remote Scale kg/lb relationship Remote Scale kg/lb relationship
Remote Scale kg/lb relationship
q
When the capacity was set by “kg”:
Let capacity x minimum division = Ws x W
d
(kg)
When:
d = 1, then W
d
(lb) = W
d
(kg) x 2
d = 2, then W
d
(lb) = W
d
(kg) x 5/2
d = 5, then W
d
(lb) = W
d
(kg) x 2
And:
Ws (lb) = W
d
(kg) x No
Example: 15kg x 0.002kg, No = 15kg/0.002kg =7,500
W
d
(lb) = 0.002 x 5/2 = 0.005 (lb)
Ws (lb) = 0.005 (lb) x 7,500 = 37.5 (lb)
q
When the capacity was set by “lb”:
Let capacity x minimum division = Ws x W
d
(lb)
When:
d = 1, then W
d
(kg) = W
d
(lb) x 1/2
d = 2, then W
d
(kg) = W
d
(lb) x 1/2
d = 5, then W
d
(kg) = W
d
(lb) x 2/5
And:
Ws (kg) = W
d
(lb) x No
Example: 30lb x 0.005lb, No = 30lb/0.005lb =6,000
W
d
(kg) = 0.005 x 2/5 = 0.002 (kg)
Ws (kg) = 0.002 (kg) x 6,000 = 12 (kg)
Calibrating the Remote Scale
Calibrating the Remote Scale Calibrating the Remote Scale
Calibrating the Remote Scale
When a remote scale is newly connected, set the capacity and calibrate the scale
using a weight.
The scale must be warmed up (plugged in) for at least 30 minutes before starting
calibration.
1. Remove the calibration switch cover, and
press the calibration
CAL
switch.
The scale shows “CAL” in the count display.
q Press the CAL switch to exit without
calibrating the scale.
2. Press the REMOTE SCALE key to
display SCALE “ ”.
When SCALE “ ” is displayed, press the
REMOTE SCALE key again.
q Once the remote scale has been
calibrated, the display will go to step 4.
USA Version ONLY
# # # # # # #
88 Cal 10
&&
F?I
[ Z E R O ] C a l i b r a t i o n
1234567890123
[ T A R E ] G r a v i t y A c c e l e r a t i o n
1234567890123
# # # # # # #
88 Cal 10
&&
F?I
M a x i m u m C a p a c i t y ( k g )
Cal4567890123aaaaaaaaa10.00 0
[ T A R E ] G r a v i t y A c c e l e r a t i o n
1234567890123
SCALE “ ”: Main Scale
SCALE “ ”: Remote Scale