A&D EJ-123, Инструкция по эксплуатации

Страница: 10 / 56

8
4. SETTING UP
4.1.
Setting Up Your Balance
1. Place the weighing pan on the balance.
2. Adjust the level of the balance using the leveling feet. Use the spirit level to confirm.
The bubble should be in the center of the circle.
For the EJ-123, EJ-303, EJ-1202 and EJ-3002 balances, the two leveling feet on the
front side have a two-tier structure. To adjust the height of the balance, turn the lower
leveling feet. Loosen the upper leveling feet if the lower leveling feet are not easy to
turn.
Loosen the upper leveling foot if the
lower leveling foot is not easy to turn.
Adjust the height of the balance by
turning the lower leveling foot.
After adjusting the height of the balance,
tighten the upper leveling feet
if a rattling of the leveling feet occurs.
3. Calibrate your balance before use. (Refer to “
7. CALIBRATION
”)
About the wind shield cap (EJ-123 / EJ-303 only)
Should the displayed weight value be unstable due to a draft, attach the accessory wind
shield cap to the hole located on the top of the breeze break.
It is possible to reduce the entry of a draft into the breeze break to some extent.
If attached, it may take time for the STABLE indicator to be displayed due to a variance
in air pressure as a result of the closure of the breeze break.
Wind shield cap (accessory)