A&D EJ-123, Инструкция по эксплуатации

Страница: 23 / 56

21
6.2.
Selecting a Weighing Unit
1. Press the UNITS key to select a unit to be
used in the accumulation function.
The unit cannot be changed after the
accumulation data is stored. To change the unit,
reset the accumulation data and then press the
UNITS key.
Note that multiple units cannot be used in the
accumulation function.
6.3.
Adding the Accumulation Data
2. Press the RE-ZERO key to set the display to zero.
3. Place the sample on the pan.
4. Wait for the STABLE indicator to turn on.
Press the SAMPLE key to accumulate the
weight value. The
indicator turns on.
5. Repeat steps 2 to 4 to weigh
other samples.
The
indicator flashes once
for each sample.
6.4.
Displaying the
Accumulation Data
6. When the UNITS key is
pressed, the weight value,
accumulated count and
accumulated mass value are
displayed sequentially.
The
indicator and
turn on when the accumulated
count or accumulated mass
value is displayed.
6.5.
Deleting the Accumulation Data
1. Display the accumulated count or accumulated mass value.
2. Press the RE-ZERO key to reset the accumulated count and accumulated mass value to
zero. The indicator and turn off and the state of the balance returns to step
1 on this page.
When the item “
Unit
” of the function list is changed, the accumulation data is reset to
zero.
0.000
g
ZERO
Sample
Weighing pan
0.000
g
ZERO
Unit
30.003
g
0 30.003
g
M+
When accumulating data is stored,
the indicator turns on.
3
M+
90.009
g
M+
Weight value
(
and unit)
Accumulated count
(
and )
Accumulated mass
(
,
and unit)