manualshive.com logo in svg

A&D EJ-1202, Инструкция по эксплуатации

Поделиться
Скачать
A&D EJ-1202 Скачать руководство пользователя страница 11

 

 9   

Balance location 

 

To measure correctly, to keep the balance in good condition, and to prevent hazards, 
observe the following: 

 

  Do not install the balance in locations that are subject to excessive dust, breezes, vibration, 

large temperature fluctuations, condensation, or that may have magnetic fields. 

  Install the balance on a solid surface and keep the balance level. 
  Do not install the balance in direct sunlight. 
  Do not install the balance near heaters or air conditioners. 
  Use a stable AC power source. 
  Do not install the balance in locations where combustible or corrosive gases may exist. 
  Allow the balance to reach equilibrium with the ambient temperature before use.

 

  To ensure accurate weighing, turn the power ON at least half an hour before use, or 

have the AC adapter connected to the balance. 

  When the balance is installed for the first time, or the balance has been moved, carry 

out calibration as described in “

7. CALIBRATION

”. 

 
 

4.2.

 

Power Source 

For the power source, the AC adapter or 4 x size “AA” 
batteries can be used. 

When Using the AC Adapter 

Use a stable power source. To use the AC adapter, 
insert the AC adapter plug into the AC adapter jack 
on the rear side of the balance. 
The balance is always connected to power internally 
(warming up status) while the AC adapter is connected 
to the balance even when nothing is shown on the 
display. 
 

When Using the Batteries 

Prepare 4 x size “AA” (LR6 / R6P) batteries. The batteries are not provided with the 
balance. 
 

CAUTION 

  Take great care with the polarity of the batteries. The polarity marks are shown in the 

battery box. 

  Replace the used batteries with four new ones when “

lb0

” is displayed. 

  Do not mix used and new batteries. Do not mix battery types. It may cause damage to 

the batteries or the balance. 

  The battery life depends on the ambient temperature, how used and so on. 
  Remove batteries when the balance is not to be used for a long period of time.   

They may leak and cause damage to the balance. 

  Damage due to battery leakage is not covered by the warranty. 

 
 
 

AC adapter jack

 

Содержание EJ-1202

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды