Aalborg DPM Series, Руководство по эксплуатации

Страница: 96 / 111

COMMAND
NAME
DESCRIPTION
N
o
.
COMMAND SYNT
AX
Command
Argument 1
Argument 2
Argument 3
Argument 4
Response
A OLED Flow Running A
verage
[0-25]
<new value> [0-25] samples
LA:<value>
Example: LA:1
No Argument (Returns Current settings)
LA:<value> Example: LA:1
E OLED Flow reading Dead Band in % F
.S. [0.0 - 0.99]
<new value> [0.0-0.99] %FS
LE:<value> Example: LE:0.01
No Argument (Returns Current settings)
LE:<value> Example: LE:0.01
No Argument Returns OLED support status: Y or N
L:Y
Auto Zero
Sets/Reads Meter Auto Zero related parameters W
ARNING: make sure absolutely no
fl ow through the meter during Sensor Zero offset calibration! NOTE: For proper result meter has to be connected to power for at least 15 minutes prior to Auto Zero calibration. Auto Zero Status return parameters: <T value> - Current T
are value
<ADC value> - Current ADC value AZ Status: N
– Auto Zero Not Started
I
– Auto Zero In Process
F – Auto Zero Failed D
– Auto Zero is Done (Success)
W
ARNING: make sure meter is open to
atmosphere and absolutely no fl
ow
through the meter during AP Sensor tare procedure! New AP V
alue must be
taken from reference AP standard in PSIA!
24
Z
V Display current Zero V
alue
No Argument
ZV
:< V
alue>
Example: ZV
,589
N Start Sensor Auto Zero calibration now
.
NOTE: make sure absolutely no fl
ow through the meter!
No Argument
ZN NOTE: For proper result meter has to be connected to power for at least 15 minutes prior to Auto Zero calibration
S Display Flow Auto Zero Status
No Argument
ZS: <T value>,<ADC value>, <AZ Status> Ex: ZS:7492,70581,N
A Absolute Pressure Sensor Tare request and status NOTE: make sure absolutely no fl
ow through the meter!
New AP V
alue must be taken
from reference AP standard!
No Argument (Returns Current settings and status)
APZ:<OffsetV
alue>,<ADC
value>,<T
empCounts>,<A
Zstatus> Example: APZ:-0.0266,- 640002,839,N
<New V
alue>
[13.1 – 15.99] PSIA
ZA:<value> Example: ZA.