background image

Chapter 3  Award BIOS Setup    

43

3.6.2 CPU Internal Cache/External Cache

Cache memory is additional memory that is much faster than
conventional DRAM (system memory). When the CPU requests
data, the system transfers the requested data from the main
DRAM into cache memory, for even faster access by the
CPU.The External Cache field may not appear if your system
does not have external cache memory.

The choices: Enabled(Default), Disabled.

3.6.3 CPU L2 Cache ECC Checking

When you select Enabled, memory checking is enable when the
external cache contains ECC SRAMs.

The choices:Enabled(Default), Disabled.

3.6.4 Quick Power On Self Test

Select Enabled to reduce the amount of time required to run the
power-on-self-test (POST). A quick POST skips certain steps.

The choices: Enabled(Default), Disabled.

3.6.5 First/Second/Third Boot Device

The BIOS attempts to load the operating system from the devices
in the sequence selected in these items.

The choices:

First Boot Device: Disable, Floopy(Default), LS120, HDD-0,
SCSI, CDROM, HDD-1, HDD-2, ZIP100

Second Boot Device: Same as above. Default value - HDD0

Third Boot Device: Same as above. Default value - LS120

Содержание SBC-657





















































































Отзывы: