manualshive.com logo in svg

Aaeon SBC-598, Руководство пользователя

Поделиться
Скачать
Aaeon SBC-598 Скачать руководство пользователя страница 76

6 8

SBC-598 User Manual

DOS

VGA drivers do not have to be installed when operating in DOS.
Changing the VGA settings requires running the program
"SVGAUTIL.EXE."

VGA Utility

1. Insert the disk which contains the SiS 5598 DOS VGA Utilily

installation program

2. Run the setup program called "SVGAUTIL.EXE"

You should now see the screen for setting various VGA options:

a) Video Mode Setting,

b) Frame Rate Setting, and

c) Power Saving Setting.

3)  Once you have made your changes, you can choose to save the

changes to the "AUTOEXEC.BAT" file or not.

Video Mode Setting

A list of the different video modes that can be supported is displayed.
Be sure to first test the video mode, by highlighting the mode and
then by pressing <F1>, before making a final selection.

Frame Rate Setting

Much like the Video Mode Setting, a list of valid frame rate modes
will be displayed which includes the monitor display resolution and
the corresponding frame rate.  Again, first press <F1> to test if the
monitor can support the frame rate before finalizing your frame rate
selection.

Power Saving Setting

Here you can set the timers for the Standby and Suspend power
saving modes.  Highlight the "Standby Timer" or "Suspend Timer"
option to change the timer values.

Содержание SBC-598

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды