Aaeon PCM-4330, Инструкция по эксплуатации

Страница: 111 / 127

111
Appendix A: Troubleshooting
The following notes might help you when encountering problems after the
installation of the PCM-4330 single board computer or software.
If you can not solve the problem after referring to this section, please contact your
dealer who will need the following information together with your problem
report:
n
Description of the problem.
n
Have you tried workarounds? Which?
n
Serial number of your PCM-4330.
n
Type and model of your computer system.
n
Type and model of expansion cards installed in the system.
n
Name and version of installed software and drivers.
n
Error messages by POST, operating software or application software (if any)
n
Hardcopy of the files AUTOEXEC.BAT, CONFIG.SYS, SYSTEM.INI and
WIN.INI (MS-DOS and MS-Windows only).
Problem
It seems as if the system is performing system checks and booting file
operating system but there is no output on the screen.
Answer
Please check the following:
8
Is the PCM-4330PC/104 board computer installed properly?
8
Check power supply of computer system and monitor. If the display has
its own power switch, make sure it is set to the on position.
8
If an additional graphics adapter is installed in the system, remove the second-
ary adapter and check whether the system operates properly with only one graph-
ics adapter installed.
8
Check settings of the switches and jumpers on the PCM-4330 board.
8
Check settings of DIL-switches SW.3 to SW.8 of the LC display configuration
switches. Check the LCD connector and cabling between the display and the
PCM-4330 board (proper connectors, polarity).