Aaeon IMBA-H110A, Руководство пользователя

Страница: 39 / 46

3-9
Chapter 3: BIOS setup
3.3.7 USB Configuration
The USB Devices item lists auto-detected values. If no USB device is detected,
the item shows None.
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating
systems (OS).
[Disabled] USB devices are only available when running BIOS Setup.
[Auto] Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
3.3.8 Digital IO Port Configuration
The items listed in this screen configure Digital IO settings.
DIO Port1~DIO Port4 [Output]
Configuration options: [Input] [Output]
DIO Port5~DIO Port8 [Input]
Configuration options: [Input] [Output]
The following item appears only when you set
DIO Port1~8
to [Output].
Output Level [High]
Configuration options: [High] [Low]
3.3.9 Power Management
Power Mode [ATX Type]
Select power supply mode. Configuration options: [ATX Type] [AT Type]
The following items appear when you set Power Mode to [ATX Type].
Restore AC Power Loss [Always Off]
[Last State] The system goes into either off or on state, whatever the system
state was.
[Always On] The system goes into on state after an AC power loss.
[Always Off] The system goes into off state after an AC power loss.
E13195_IMBA-H110A_Guide.indb 9 2017/9/25 14:05:16