Aaeon IMBA-H110A, Руководство пользователя

Страница: 26 / 46

IMBA-H110A
2-18
CAUTION:
Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
connectors!
3. Chassis / CPU fan connectors (4-pin CHA_FAN1/2, 4-pin CPU_FAN1)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
4. Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~3)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
IMPORTANT:
When using hot-plug and NCQ, set the SATA Mode Selection
item in the BIOS to [AHCI]. See section
3.3.3 SATA Configuration
for details.
IMBA-H110A
IMBA-H110A Fan connectors
CHA_FAN1
PWM
SENSE
VCC
GND
CHA_FAN2
A A
B
B
C
C
CPU_FAN1
PWM SENSE VCC GND
PWM SENSE VCC GND
IMBA-H110A
SATA6G_3
SATA6G_1
GND
RSATA_TXP1 RSATA_TXN1
GND
RSATA_RXN1 RSATA_RXP1
GND
GND
RSATA_TXP3 RSATA_TXN3
GND
RSATA_RXN3 RSATA_RXP3
GND
SATA6G_2
GND
RSATA_TXP2 RSATA_TXN2
GND
RSATA_RXN2 RSATA_RXP2
GND
IMBA-H110A Intel
®
SATA 6 Gb/s connectors
E13195_IMBA-H110A_Guide.indb 18 2017/9/25 14:05:14