mode, the camera still consumes certain power at µA level. Therefore,
please remove the battery if the camera will not be used for a long time
(
Cautions: The Power Switch can’t be Slide From “OFF” Mode directly
to “ON” Mode or From “ON “ Mode to “ TEST” Mode. Each time,
user should Slide power switch into “OFF” Mode, then into “Test”
Mode and Finally Enter into “ON” Mode
)
ADVANCED SETTING
3.1) Parameter Settings
This chapter explains the advanced operations for customizing the
camera settings. The settings can only be customized in
TEST
mode and
there are two ways are available to customize the camera settings.
Including: Remote control and Parameters Setup EXE file Storage on
CD Disk.
Following will introduce how to customize the camera settings by remote
control:
Press “
MENU
” Key to Enter/Exit the menu, Press
, to
move the marker, Press
,
to change the setting.
Parameter
Settings
(Bold=
Default
)
Description
Mode
Camera
Video
Video
Select
which Mode you would like
to use. In
video
mode, the
camera will first take a picture and
then start to record Video
immediately
.
