EmbeddedBlue 500
31
Copyright ©2003 A7 Engineering, Inc.
18.
Check the
Wrap lines that exceed terminal width
checkbox.
19.
Click
OK
.
This will return to the Properties dialog.
20.
Click
OK
.
Step 5: Establish a Connection Using HyperTerminal
In this step we will establish a connection from the PC to the eb500 on the Board of
Education, using HyperTerminal. This step relies on the connection information
created previously in Step 3.
1.
On the
Call
menu, click
Call
.
This will establish a connection with the eb500 on the Board of Education board.
The Connection Status LED (Figure 1) on the eb500 module will turn on when a
connection is established.
2.
On the
Call
menu, click
Disconnect
.
This will close the connection with the eb500 on the Board of Education.
