30
User Manual
Copyright ©2003 A7 Engineering, Inc.
Step 4: HyperTerminal Setup
In this step we will setup the Windows HyperTerminal application to establish a
connection with the eb500 on the Board of Education board.
1.
Open
HyperTerminal
.
This will display the Connection Description dialog.
2.
In the
Name
box, type the name of your connection. For example, eb500-BOE.
3.
Click
OK
.
This will display the Connect To dialog.
4.
In the
Connect using
dropdown, select the
serial port
to which the DBT-120
Bluetooth software associated with the connection from the PC to the eb500 on the
Board of Education board.
The COM port associated with the connection was discovered in the previous step.
5.
Click
OK
.
This will display the Properties dialog.
6.
In the
Bits per second
dropdown, select
9600
.
7.
In the
Data bits
dropdown, select
8
.
8.
In the
Parity
dropdown, select
None
.
9.
In the
Stop bits
dropdown, select
1
.
10.
In the
Flow control
dropdown, select
None
.
11.
Click
OK
.
This will establish a connection with the eb500 on the Board of Education board.
12.
On the
Call
menu, click
Disconnect
.
This will disconnect the connection just established, so that we can modify the
connection properties in the following actions.
13.
On the
File
menu, click
Properties
.
This will display the Properties dialog.
14.
On the
Settings
tab, click
ASCII Setup
.
This will display the ASCII Setup dialog.
15.
Check the
Send line ends with line feeds
checkbox.
16.
Check the
Echo typed characters locally
checkbox.
17.
Check the
Append line feeds to incoming line ends
checkbox.
