12
• Ensure that the location is out of the reach of children or anyone in the water.
• Connect the ozone supply tube to the ozone outlet at the bottom of the unit.
• If the ozone supply tubing is too long, trim it with household scissors or a razor knife.
• Place the white diffuser stone 4 inches into the body of water.
• Place the diffuser stone near the center of the body of water for maximum ozone
saturation.
• Plug the Aqua-6 into a ground fault circuit interrupter (GFCI) protected outlet.
• Turn the unit on and set it to the desired program function.
• The Aqua-6 will then begin functioning in 10 seconds.
NOTE:
For greater volumes of water, see our larger output ozonators at
www.a2zozone.
com
.
