Page 12 09/2021
Instruction Manual
Jump starter Booster 12/24V 10000/5000A
6. Using the Emergency Starter as
a 12V or 24V Memory Saver
■
Always wear safety goggles and keep your face away from the battery when
connecting it.
■
Check that the emergency starter is in the OFF position.
■
Check the voltage of the vehicle battery.
CAUTION:
Voltage incompatibility between the emergency starter and the voltage of the
vehicle´s electrical system can cause explosions and damage the vehicle,
product and people.
■
Be sure that the Battery Clips are disconnected.
NOTE:
If the Battery Clips are connected, the „Err8“ error, will showed.
■
Now PRESS „START/STOP“, the display show „SET“
■
Select the correct tension, 12V or 24V, using the selection button
■
Set „MEMORY SAVER“ function.
■
Now PRESS „START/STOP“ for 3 seconds, until „ON“ blink on the display.
■
Release the button and the display show „MEMO“
■
Connect the Battery Clips and perform the Memory Saver activities.
■
Identify the pole corresponding to the earth of the vehicle; this is generally
connected to the negative terminal.
CAUTION:
Never switch polarity. Always connect the output conductor with a red battery
clip (+) to the positive pole of the battery and the output conductor with a black
battery clip (-) to the vehicle‘s earth (ground).
CAUTION:
Inverting polarity can cause explosions, damage the vehicle, product and people.
