Chapter 3 Award BIOS Setup
6240V Mainboard
34
INTEGRATED PERIPHERALS
This section page includes all the items of IDE
hard drive and Programmed Input/Output features. See also Section “Chipset Features Setup”.
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
OnChip IDE Channel 0
: Enabled
UART Mode Select
: Normal
OnChip IDE Channel 1
: Enabled
UART2 Duplex Mode
: Half
IDE Prefetch Mode
: Disabled
RxD , TxD Active
: Hi, Lo
Primary Master PIO
: Auto
IR Transmission Delay
: Enabled
Primary Slave PIO
: Auto
Onboard Parallel Port
: 378/IRQ7
Secondary Master PIO
: Auto
Parallel Port Mode
: ECP
Secondary Slave PIO
: Auto
ECP Mode Use DMA
: 3
Primary Master UDMA
: Auto
EPP Mode Select
: EPP1.7
Primary Slave UDMA
: Auto
PWRON After PWR-Fail : Off
Secondary Master UDMA
: Auto
Secondary Slave UDMA
: Auto
Init Display first
: PCI Slot
Power On Function
: Button Only
Esc: Quit
áâàß
: Select Item
KBC Input Clock
: 8 MHz
F1 : Help PU/PD/+/-
: Modify
Onboard FDC Controller
: Enabled
F5 : Old Values (Shift) F2: Color
Onboard Serial Port 1
: 3F8/IRQ4
F6 : Load BIOS Defaults
Onboard Serial Port 2
: 3F8/IRQ3
F7 : Load Setup Defaults
OnChip IDE Channel 0; OnChip IDE Channel 1
This setup item allows you to
either enable or disable the primary/secondary controller. You might choose to disable
the controller if you want to add higher performance or specialized controller.
IDE Prefetch Mode
Enable/Disable IDE Read Prefetch Buffer.
Primary Master/Slave PIO; Secondary Master/Slave PIO
PIO - Programmed Input/Output, it allows the BIOS to tell the controller what it wants
and then let the controller and the CPU to complete the task by themselves. This is
simpler and faster. Your system supports five modes, 0 - 4, which primarily differ in
timing. When
Auto
is selected, the BIOS will select the best available mode.
Primary Master/Slave UDMA; Secondary Master/Slave UDMA
Auto, will
support the Ultra DMA function. Disabled, will not support the Ultra DMA function.