5 USE RULES
Pag. 22 di 37
In this occasion, we suggest to control the chart
, where, according to the
increase of the centre of gravity (x-axis) there is a load reduction multiplying factor (y-axis).
The multiplying factor, obtained based on desired load centre position, will be multiplied with
nominal capacity of the equipment. The result of this multiplication will be actual capacity of
the attachment.
Continuous line is for equipment with load center at 500 mm.
Dotted line is for equipment with load center at 600 mm.
NOTE -
This calculation is valid only for “stable” load, in
case of movement of liquid material please contact the
produce.
The affordable stroke can compromise the stability of the forklift.
To check the nominal capacity of the combination forklift
–
attachment ask the
producer of the forklift.
Picture 18
Residual capacity (Pair of forks)
M
ultiplicative f
acto
r
Center of gravity (mm)
