A.O. Smith KJ1200F-B01-HK, Инструкция по эксплуатации

Страница: 7 / 16

15
Operation Instructions
Control Panel of Air Purifier
To Operate______ A “beep” will be heard and the will light up after the plug is connected to the power.
Press to turn on the unit, sensors will initialize and all icons will light up one by one and
the unit will run in “SMART” mode as default.
SMART_________ Intelligence system will detect air quality, brightness of surrounding and change its setting
automatically to the optimize performance.
SLEEP__________ Indication light will go off & lower the wind speed to create a peaceful environment for
sleeping.
QUICK__________ Suggest selecting this mode if environment is badly polluted.
FAN____________
Press the “ ” button to adjust wind speed: “Low
～
” “Mid
≈
” “High
≋
”
TIMER _________
Press button to active and set the off timer. After the mode is being activated,
the “Air Volume Monitor” will turn into a timer display. Each time the button is being
pressed, the off timer will increment by 1 hour and the maximum setting is 12 hours. After
the setting is completed, the display will resume to “Air Volume Monitor” and the off timer
icon will appear. The unit will turn off automatically when timer countdown to 0. To
cancel this function, set the timer to 0 or restart the unit.
L-OUTLET OFF___ Under this mode, the fan at lower air outlet will turn off and the total output flow rate will
reduce by half.
Main-Filter Lifespan
Indicator
Pre-Filter Lifespan
Indicator
Wind Speed Monitor
(Off Timer Indicator)
PM2.5 Pollution
Monitor & Meter
Filters Position
Indicator
Gas Pollution Monitor
Sensor Filter Lifespan
Indicator
Set hour displays on Off Timer
(Example of 3 hrs. shut of timer)