A.O. Smith KJ1200F-B01-HK Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 16

A.O. Smith KJ1200F-B01-HK Скачать руководство пользователя страница 10

18

I.

Replace Sensor Filter

II.

Reset Filter Lifespan Indicator Instruction

The below indicator reset instruction is located between the upper and lower filters compartment.
Please reset corresponding lifespan indicator after filter has been replaced.

III.

Reset Sensor Filter

While the unit is on, press the sensor reset button as shown on
the  right  for  3  seconds.  When  a  “beep”  is  heard,  the
corresponding  indicator  will  also  light  off.  It  means  the
indicator has been reset properly.

1 Disconnect the power supply & make sure wheels are

unlocked. Open the back cover & remove all filters at the upper
compartment.

2 Pull out the cartridge to replace filter as shown

above.

3 After the cartridge is pulled out, remove the old filter as

direction shown above.

4 Insert a new filter to the cartridge as shown above and

install the cartridge to the unit.

Note

：

The sensor filter has been pre-installed in factory; no installation is needed for the initial operation.

Sensor Filter Cartridge

Indicators Reset Instruction &
Reset Buttons

Sensor Filter (Old)

Sensor Filter (New)

«
...
8
9
10
11
12
...
»

Содержание KJ1200F-B01-HK

















Отзывы:

Нет отзывов