A.O. Smith Jaguar CEWHR, Руководство пользователя

Страница: 15 / 20

11
• When it is necessary to drain the water heater, first close the inlet valve, move the handle of the
pressure relief safety valve and release the nut connected with the water output adapter of the
container. This will ensure that the water flows out from the flow guild pipe.
• Clean water tank periodically to get rid of scale.
Step by step guide: 1) Shut off power input.
2) Remove pressure-relief safety valve and water inlet.
3) Connect water outlet to tap water to introduce the water; connect original water
inlet to floor drain with a pipe to discharge the water.
4) Fully open the water inlet valve to wash the tank with flowing water until the
water flowing out of the tank becomes clean.
5) Re-connect water inlet and outlet according to diagram (refer to diagram for
Wiring Diagram of CEWHR, Cylinder Electric Wall Hung Water Heater with Remote
Control) and start to use after leakage test is passed.
Caution: Water discharged could be very hot, please take care so as not to get scalded.
Maintenance
Declaration: Only qualified service technicians are allowed to repair and maintain this water heater.
Incorrect operations may cause serious injuries or property loss.
Warning: Electric shock
This appliance must be unplugged before being opened up or repaired.
Attention: Before calling for repair service, please use the Troubleshooting List on the next page as a
guide to correct apparent problems.
Repair and Maintenance
Black