A.O. Smith DURA-Power DRE-52 Скачать руководство пользователя страница 24

24

4.4 

Exclusions

The warranty referred to in Articles 1 and 

2 does not apply:

a)  if the boiler has been damaged by an 

external cause;

b)  in case of abuse, neglect (including 

freezing), modification, incorrect and/

or deviating use of the boiler and if 

attempts have been made to repair 

leaks;

c)  if contamination or other impurities 

were allowed to flow into the tank.

d)  if the conductivity of the water is less 

than 150 microSiemens and/or the 

hardness of the water is less than 

6°DH;

e)  if unfiltered, recirculated water flows 

through or is stored in the boiler;

f )  if the owner has attempted to repair 

a defective boiler himself;

4.5 

Extent of the warranty

A.O. Smith's commitments pursuant 

to the warranty provided are confined 

to the delivery free of charge of the 

boiler to be replaced or any parts 

thereof ex the Veldhoven warehouse. 

Any costs involved with transport, 

labour, installation or any other capacity 

connected to the replacement cannot be 

charged to A.O. Smith.

4.6 

Claims

A claim based on the warranty provided 

shall be deposited with the dealer from 

whom the boiler was purchased or 

any other dealer who sells products 

manufactured by A.O. Smith. The 

examination of the boiler as referred to in 

the Articles 1 and 2 will take place in an 

A.O. Smith laboratory.   

4.7 

No obligations for  

A.O. Smith other than 

those specified here.

In relation to its boilers or else the 

boilers (or parts or components thereof) 

supplied for replacement, no warranty 

or guarantee is given by A.O. Smith 

other than the warranty given here. 

A.O. Smith will not be held liable for any 

damage to property or persons under 

the warranty given or in any other way 

caused by a boiler it has supplied (parts 

or components or the steel glass lined 

tank) (for replacement). 

DRE 52

DRE 80

DRE 120

Содержание DURA-Power DRE-52



























Отзывы: