26
Figure 5.7 Figure 5.8
6. Water Circulating Pump Setting
Press the button of
or
to select the sub menu of PUMP on the main menu
interface, and then press the button of SET to enter the pump parameters setting interface.
Press the button of
or
to select the sub menu of
START/STOP on the pump setting
menu interface. The factory default setting of pump is stop. Press the button of MODIFY to
select START if necessary as illustrated in figure 5.9, which means turn on the water
circulating pump.
Figure 5.9
Press the button of
or
to select the sub menu of TIMER on the pump parameters
setting interface as illustrated in figure 5.10. Press the button of SET to enter the timer setting
interface illustrated in figure 5.11. There are two options in sub menu interface of timer, start
and stop. Press the button of
or
to select the sub menu of START and then press the
button of SET to set the hour and the minute. Press the button of
or
to change the
hour and the minute of start. Press the button of OK to confirm the start time. The stop time
setting is the same as the start time. Press the button of EXIT to return to the pump
parameters setting interface.
Figure 5.10 Figure 5.11
Press the button of
or
to select the sub menu of MODE on the pump parameters
setting interface as illustrated in figure 5.12. Press the button of SET
to enter the sub menu of
water circulating pump operation mode selection illustrated in figure 5.13. The sub menu has
Содержание CAHP-120 Series
