A.O. Smith 300A страница 24 Скачать руководство пользователя

Страница: 24 / 40

Viewing the Fault History

The controller for this water heater will store a history of ten of the last Fault and Warning conditions that occurred. This is stored in the

Fault History. Along with all the information about the fault, including a estimate time of when the fault occurred, information regarding

the advanced diagnostics for that fault can be accessed at any time.

Viewing Information About the Heater

The electronic control for this water heater monitors many different aspects of the water to ensure safe and optimal operation. Much

of the information monitored is available to view in two areas of the control. The first is the "Heater Status" and; the second is "Heater

Information". These items can be selected through the main menu in the same fashion as described above. In these menus, detailed

information about the water heater and the current status of specific conditions can be found.

Содержание 300A









































Результаты поиска

Содержание 300A

Отзывы:

Похожие инструкции для 300A

Бренды по названию

Популярные бренды

A.O. Smith 300A, Руководство пользователя

Результаты поиска

Содержание 300A

Отзывы:

Похожие инструкции для 300A

Бренды по названию

Популярные бренды