A-Neuvideo ANI-8MFS, Инструкция по эксплуатации

Страница: 7 / 20

5
Remote Control
Remote Control
q
POWER:
Press this button to switch the device on or to set it to standby mode.
w
HDMI 1~3, PC 1~3, CV & COMP:
Direct source selection keys. Press one of
these keys to switch to the required source.
e
MENU:
Press this button to enter the OSD menu.
r
EXIT:
Press this button to exit the menu or the current selection in the OSD menu.
t
OK & ▲/▼/◄/►:
Press OK to confirm the selection or press the arrow buttons to
navigate the OSD menu. When the OSD menu is not active, use the LEFT/RIGHT
(◄/►) to control the volume level.
y
AUTO ADJUST:
Press this button when the image being outputted does not
correctly fit the display’s screen. The device will auto adjust the image to fill the
screen.
i
RESET:
Press this button to reset the device back to the default settings.
A NEU VIDEO