A-Neuvideo ANI-42HDFIX, Инструкция по эксплуатации

Страница: 6 / 24

4
FRONT & REAR PANELS
FRONT PANEL
q
POWER LED: Blue LED indicates that the unit is powered. Red LED indicates that the unit is in standby mode.
w
IR SENSOR: IR input for remote control of the switcher.
e
OUT A / OUT B: LED and button for each output
■ LED 1 to LED 4: Blue LED Indicates when the input is selected for the respective output.
■ AUTO LED: Green when Auto detection mode is enabled.
• Press to select the desired input.
• Press and hold for 3 seconds to toggle the Auto detection mode.
REAR PANEL
q
SOURCE: HDMI Source inputs 1 to 4
w
DISPLAY: HDMI outputs for displays A and B.
e
12V: Plug DC 12V/1A power supply into the unit and connect the adapter to an AC outlet.
r
CONTROL:
■ LAN (RJ45): Control port for LAN control or accessing the built-in Web GUI.
■ RS-232: 3-pin pluggable connector for RS-232 control of the Matrix.
■ IR IN: IR Eye input for IR control of the Matrix.
t
RS-232-A / RS-232-B: 3-pin pluggable connectors for RS-232 of the display devices.
IR OUT A / IR OUT B: IR eye output for IR control of the display devices.
y
AUDIO OUT A: TosLink connector for optical audio from HDMI Output A / 3-pin pluggable connector for stereo audio from HDMI
Output A.
u
AUDIO OUT B: TosLink connector for optical audio from HDMI Output B / 3-pin pluggable connector for stereo audio from HDMI
Output B.
i
EARTHING POINT: Screw terminal for earthing the Matrix.
A NEU VIDEO