A-Neuvideo ANI-42HDFIX, Инструкция по эксплуатации

Страница: 18 / 24

16
ASCII Command
EDID SETTING
s edid in x from z!
Set input x EDID from default EDID z, x=0~4 (0=all), z=1~25
1=1080p,Stereo Audio 2.0
2=1080p,Dolby/DTS 5.1
3=1080p,HD Audio 7.1
4=1080i,Stereo Audio 2.0
5=1080i,Dolby/DTS 5.1
6=1080i,HD Audio 7.1
7=3D,Stereo Audio 2.0
8=3D,Dolby/DTS 5.1
9=3D,HD Audio 7.1
10=4K2K30_444,Stereo Audio 2.0
11=4K2K30_444,Dolby/DTS 5.1
12=4K2K30_444,HD Audio 7.1
13=4K2K60_420,Stereo Audio 2.0
14=4K2K60_420,Dolby/DTS 5.1
15=4K2K60_420,HD Audio 7.1
16=4K2K60_444,Stereo Audio 2.0
17=4K2K60_444,Dolby/DTS 5.1
18=4K2K60_444,HD Audio 7.1
19=4K2K60_444,Stereo Audio 2.0 HDR
20=4K2K60_444,Dolby/DTS 5.1 HDR
21=4K2K60_444,HD Audio 7.1 HDR
22=User1
23=User2
IN1 EDID: 1080p,Stereo Audio 2.0
r edid in x!
Get EDID status of the input x, x=0~4 (0=all input) IN1 EDID: 4K2K60_444, Stereo Audio
2.0
IN2 EDID: 4K2K60_444, Stereo Audio
2.0
IN3 EDID: 4K2K60_444, Stereo Audio
2.0
IN4 EDID: 4K2K60_444, Stereo Audio
2.0
r edid data hdmi y!
Get the EDID data of the hdmi output y port, y=1~2 EDID: 00 FF FF FF FF FF FF 00 ……
AUDIO SETUP
s hdmi y arc z! Turn on/off arc of HDMI output y, y=0~2 (0=all) z=0~1 (z=0, off,
z=1 on)
hdmi output 1 arc on
hdmi output 1 arc off
r hdmi y arc! Get the arc state of HDMI output y, y=0~2 (0=all) hdmi out1 arc on
s spdif x mute y! Enable/disable the audio outputs . x=1~2 (1=spdif 1, 2=spdif 2),
y=0~1 (0=unmute, 1=mute)
spdif 1 mute
r spdif x mute! Read the audio output state. x=1~2 (1=spdif 1, 2=spdif 2 ) spdif 1 mute
NETWORK SETTING
r ipconfig!
Get the Current IP Configauration IP Mode: Static
IP: 192.168.1.72
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
TCP/IP port: 23
Mac address: 00:1C:91:03:80:01
r mac addr!
Get network MAC address Mac address: 00:1C:91:03:80:01
s ip mode z!
Set network IP mode to static IP or DHCP, z=0~1 (z=0 Static, z=1
DHCP)
Set IP mode: Static.
Please use “s net reboot!” command
or repower device to apply new config!
A NEU VIDEO