PAN45-01-00
(PAN45-01-00)
OFF ON
Vert
Green
3
2
1
Rouge
Red
3
2
1
Jaune
Yellow
3
2
1
Magenta
3
2
1
Cyan
3
2
1
Blanc
White
3
2
1
Eteint
Off
3
2
1
Bleu
Blue
3
2
1
Switch
(PAN45-01-00)
PAN45-01-00 DISPLAY BOX :
SETTING THE LED COLOR :
RJ45 cable
standard length : 2.00m
ACHIEVEMENT OF LABELS :
OPERATION :
The PAN45-01-00 allows you to indicate the installation status, without
having to open the cabinet door.
It is intended to report the display states on the front while ensuring
galvanic separation from the power grid. The front IP65 safety box is
supplied with «very low voltage» (5Vdc by 1kV isolated converter and 3kV
optocouplers located in the PH001 box).
The colors of the LEDs PH1,
PH2, PH3 are selectable.
7 colors possible.
Three-phase installation,
with only one phase present
correct (PH2) and without
neutral connected, the
display is turned off .
Three-phase installation, with only
one phase present correct (PH2) and
neutral connected :
- whithout voltage return, the display
will be in running light eff ect.
- with voltage return, the other phases
will be displayed under voltage.
The LEDs are of the CMS tri-LEDs type. For each channel, a switch located at the rear,
allows you to select a display color for among 7 :
Red, Green, Yellow, Blue, White, Cyan, Magenta
The diff erent possible diplays :
without neutral
with neutral
Use
Three phase
without neutral
The neutral terminal is not used.
Three phase with
neutral
Connection of neutral is not compulsory.
The connected neutral allows display in all
situations, including in the event that only
one phase is present.
This avoids having a display off when a
dangerous voltage is present.
Single phase
The 3 phase terminals are connected
together and connected to the phase.
The neutral terminal is connected to
neutral.
L1
L1
L1
L2
L2
L2
L3
L3
L3
Status
Status
Status
PH1
PH2
PH3
Status
PH1
PH2
PH3
Status
PH1
PH2
PH3
Status
PH1
PH2
PH3
Status
PH1
PH2
PH3
Status
The labels are simple sheets of paper which slip into a transparent pocket included in the tickness
of the facade. A blank label is provided with each device.
They can be done by hand, or edited on a color printer (laser or inkjet).
PC software allows you to create them, include an image, save and duplicate the creations.
This software is free and downloadable form our website :
www.ami-control.com
Possibility of printing on plastic sheets for countries with high humidity.
The box is operational as soon as :
- a voltage of 150V Ph/Ph minimum between two phases present in three-phase assembly.
- a voltage of 120V Ph/Ph minimum between two phases present and the neutral connected
in three-phase + neutral mounting.
- a voltage of 150V Ph/N between phase and neutral in single phase connection.
With a correct phase rotation and with all voltages within the adjustment limits, the signaling will be a follows :
- the phase indication LEDs (L1, L2, L3, PH1, PH2, PH3) are ON steady.
- the «Status» LED is lit in GREEN steady.
- the output relay is normally activated.
In the following explanations, no account is taken of the presence of induced voltage or of voltage return on the
absent phase. To simplify, the measurements and examples are made from channel 2 (L2, PH2).
Indicate FAST blinking
Indicate SLOW blinking
In DIN 48x48 format, with bracket mounting, it has 4 high-brightness LEDs.
The fi rst 3 LEDs are used to display the state of each phase, as well as to indicate the
direction of rotation. The 4th LED displays whether the power grid is usable or not, as
well as the type of fault found. (see on the next page, the diff erent possible displays).
- Quick connection by extra fl exible RJ45 cable, supplied with the box.
- Possibility to select a color among 7 for each of the fi rst 3 LEDs.
- Removable front label wich can be easily created by the user.