A.J.Antunes MPS-250, Руководство пользователя

Страница: 19 / 24

19
P/N 1010751 Rev. G 01/08
McDonald’s
Multi-purpose steaMer Mps-250
rePlaCeMeNt Parts (continued)
1 0011473 Top Cover Assy. 1
2 0011327 Control Housing Assy. 1
3 0011476 Solenoid Valve Assy. 1
(Incl. Item# 16 and 56)
3a 4040145 Valve, Solenoid 24 VAC 1
4 0021222 Control Panel Weldment 1
5 0020590 Base Plate Weldment 1
6 040K110 Insulation, Kit 1
(Inlc. #’s 7 & 8.)
7 0400245 Separator, Insulation 1
8 0400249 Insulation, Front 1
9 0501555 Cover, Control Housing 1
10 0501973 Retainer, Thermocouple Bulb 1
11 4050209 Thermocouple, Type K 1
12 0700599 Wire Set (not shown) 1
13 4060304 Terminal Block, 3-Pole 1
14 4010137 Rocker Switch, Power On/Off 1
15 200K135 Solenoid Tube Kit 1
16 2040101 Male Elbow 184 x 1/8 NPT 1
(see Item #3)
17 210K230 Bumper, Recess 4
18 218P145 Cover, Bumper 1
19 308P103* Screw, Machine, #8-32 x 1/4” 12
20 308P162* Screw, Machine, #8-32 x 1-1/4” 2
21 310P136* Screw, Machine, #10-32 x 1-1/4” 4
22 325P101* Stud, 1/4-20 x 1-1/2” 2
23 0011498 Diffuser 2
24 7000272 Hi-Limit Control 1
25 4060173 Cable Tie (not shown) 6
26 0020719 Main Housing Weldment 1
27 7000273 Generator, 230V/3300W 1
28 040P119 Bushing, Shorty, 5/8” 1
29 200K134 Inlet Tube Kit 1
30 208K106 Body, Quick Disconnect Fitting, 1/4” 1
31 212P148* Spacer, Brass (Zinc plated) 1
32 2140109 Loctite, #242 (Blue) (not shown)
33 2190101 Pipe, Teflon, 1/8” x 2-1/2” 1
34 306P123* Screw, Machine, SS, #6-32 x 7/8” 2
35 306P130* Nut, Hex, KEPS, Steel
(Zinc plated), #6-32 2
36 308P104* Screw, Machine, #8-32 x 3/8” 4
37 308P124* Screw, Machine, One-way,
#8-32 x 1/2” 1
38 308P143* Nut, Hex, KEPS, Steel (Zinc plated),
#8-32 5
39 362P102* Lockwasher, Internal Tooth, 5/8” 1
40 2100119 Handle, Spatula 1
41 2100118 Guard, Handle 1
42 7000290 Spatula Assy. (incl. #40 & 41) 1
43 0700606 Power Cord, Harmonized
w/Nema 6-20 Plug 1
0700453 Power Cord, Harmonized
w/CEE 7/7 Schuko Plug 1
0700437 Power Cord, Harmonized
w/IEC-309 Plug 1
0700587 Power Cord, Harmonized w/
Marechal 16 amp. Pin & Sleeve
(Australia only) Mfg. #s 9100336
and 9100346 1
4060170 Power Cord, Harmonized w/
L6-20P, 20 Amp., 250 VAC.,
Straight Twist Lock.. 1
44 040K251 Strain Relief 1
45 040P138 Locknut, 1/2” 1
46 0700592 Wire Harness, Four Channel
(not shown) 1
47 306P134* Screw, Machine, #6-32 x 3/8” 2
48 7000294 Control Board 50/60Hz
7000332 Control Board 50/60Hz
(For Mfg #s 9100336 and
9100346 only). 1
49 4010192 Four Channel Switch Board 1
50 4010191 Transformer 1
51 7000315 Solid State Relay 1
52 4050180 Heat Sink 1
53 308P145* Nut, Hex, Acorn, #8-32 6
54 310P136* Screw, #10-32x1-1/4” 4
55 210K230 Bumper Leg Kit (4 included) 1
(Includes #17,18, 54)
56 2040103 Conn. Male 1/4x1/8”NPT 1
(see Item# 3)
57 204P114 Female Elbow 1/4” 1
58 1001055 Control Panel Label 1
59 308P186* Lockwashers 1
60 4000178 Fan 1
61 4070064 PC Board, DC Fan Power Supply 1
62 0504035 Bracket, Fan Duct 1
* only available in packages of 10.
item Part description Qty.
No.
item Part description Qty.
No.