A.J.Antunes 9100320, Руководство пользователя

Страница: 9 / 24

9
P/N 1010751 Rev. G 01/08
McDonald’s
Multi-purpose steaMer Mps-250
Figure 4. operating Controls
operating instructions
1. Turn the power on (Figure 4).
2. Allow the unit to preheat for approximately 20-30
minutes.
Note: the display will read “loW” until the unit
reaches operating temperature.
3. Pull out the Spatula and place the product to be
steamed onto the Spatula.
4. Push the Spatula fully into the steamer.
5. To steam :
siNGle shot : Press the single shot button
momentarily, (1 second) and wait for the steam
to penetrate the product.
tiMed CYCle : Press the appropriate menu
button to begin the steaming cycle. Display will
count down to zero.
6. Remove steamed product.
Channel 3: 2 BuNs
• Total Cycle Time (CYC) = 12 seconds [0012]
(Range: 1 sec to 99 mins 59 secs)
• Shot Interval Time (RATE) = 3 seconds [0003]
(Range: 1 sec to 5 mins 59 secs)
• Steam Shot Time (SHOT) = 0.70 seconds [0_70]
(Range: 0.10 sec to 2.50 secs)
Channel 4: saMe as FBs-90
• Total Cycle Time (CYC) = 90 seconds [0090]
(Range: 1 sec to 99 mins 59 secs)
• Shot Interval Time (RATE) = 30 seconds [0030]
(Range: 1 sec to 5 mins 59 secs)
• Steam Shot Time (SHOT) = 0.70 seconds [0_70]
(Range: 0.10 sec to 2.50 secs).
exception:
For Manufacturing numbers 9100336 and 9100346, all
four channels are factory programmed with the same
settings as Channel 1 above.
UP DOWN PROGRAM SINGLE SHOT
1 2 3 4
LOW
Power switch
Menu Buttons
hi-limit reset Control
single shot
Button
up & down
arrow Buttons
Program
Button
display
oPeratioN (continued)
WarNiNG
to avoid injury, be careful when pulling spatula
out from unit. Be sure to allow steam to escape
before putting hands or face over the steamer.