crossover connections and input switch setting
Route the wires connected to the input terminals on the crossover network to the power amplifier.
Connect the wires to the amplifier outputs as recommended by the manufacturer of the unit. Make sure
there are no stray strands of wire which could cause a short circuit. Observe left/right polarity markings.
NOTE:
In this configuration, you may connect the amplifier (+) positive to either the tweeter (+) or woofer
(+) terminal, and the amplifier (-) negative to either the tweeter (-) or woofer (-) terminal. The parallel
switch ensures that both halves of the crossover are supplied with signal as least one (+) and (-) input
terminal are connected.
Tweeter
Woofer
Amplifer
Crossover
IN
OUT
+
-
-
+
-
+
-
+
Woofer
Tweeter
Woofer
Tweeter
+
-
+
-
+
-
Standard
(Switch in Parallel Position)
P
B
10
