-
The paint is soft during burning so do not touch it.
A.caminetti
freplace inserts are not designed to be operated with an open door.
The f
ireplace must always be closed
with the exception of adding fuel so as to prevent burning wood falling out
and combustion gases leaking into the room.
1.4. PUTTING INTO OPERATION
- Open doors and windows in the room so that the area is
fully
ventilated.
-
The frst two batches of the fuel should correspond to the lower
limit of the recommended batch for the product
1.5.
OPEN OPERATION
remove all attached documents and accessories from the f
i
replace. when f
i
rst
heating up the f
i
replace insert, the high temperature resistant paint will dry and
harden. this drying and hardening is accompanied by a smell. the fumes are
not toxic, but are unpleasant. follow those rules:
05
1.6. FIRE IN THE CHIMNEY
When burning wood, sparks from the fireplace may get into the chimney and
ignite the built up layer of soot. Therefore, the fireplace insert, smoke flue and the
chimney must be regularly cleaned. If starting the heating after a long break in
operation, then first check that the system is not blocked anywhere.
A fire in the chimney is indicated by flames coming from the mouth of the chimney with
sparking and smoke and with a smell from the fireplace. In this case:
Call the fire brigade!
- Close the air supply of the fireplace insert.
- Remove all flammable items from nearby the chimney
Before the arrival of the fire brigade, do not try to extinguish the fire in the chimney
with water. In the case of a chimney fire, the temperature can reach up to 1,300 °C.
In this case, the water will immediately turn into a huge quantity of steam and destroy
the chimney.
- After the fire is gone, contact a chimney sweep who can assess the condition of the
chimney.
