Notification:
Before starting to clean the fireplace insert, make sure that is cold and has
completely finished burning. The frequency of cleaning and the intensity of the maintenance
(fireplace insert, smoke flue, chimney) depends on the quality of the burnt wood. If the fireplace
insert was not in operation for a long time, then before heating, it is necessary to check that
the chimney is not blocked.
5.1.
ClEaNiNG ThE GlaSS
5.
ClEaNiNG aND MaiNTENaNCE
The door of the
A.caminetti
fireplace insert is produced from high-quality ceramic glass and is fitted
with a self-cleaning ceramic glass system. Air supplied into the combustion chamber “rinses”
the glass from the inside. Correct regulation of air and by burning dry wood will result in clear glass
that won’t need to be cleaned very often. To clean dirty glass in the fireplace insert with the liftdoor,
first open all the handles along the perimeter
(Fig. 10a)
. Then open the door into the cleaning
position
11
FIG.10A
FIG.10B
Only clean the glass with a wet paper cloth. If this is insufficient, apply a small amount of clean ash from
the burning chamber of the fireplace insert. Then wash the glass again with a wet paper cloth and polish
with a dry cloth.Do not use in any circumstances any aggressive cleaning detergents! These can damage
the components in the door of the fireplace insert (sealing, polished areas, stainless bars, imprinting of
glass, etc.).
5.2. REMOVING ASH
Notice: Ash can contain hot coal for up to 24 hours.Always remove the ash when it
is cold and extinguish the fireplace insert! Then place them for 24 hours into a
non-flammable vessel out of the reach of children. Your A.caminetti fireplace
insert uses the latest and the most effective grid-free method of burning. Remove
the ash within regular intervals adapted to the intensity of the heating. When
cleaning, leave a small quantity of ash to speed up the ignition.
